China Custom Agriculture Implement 3 Point Boom Sprayer Hot Sale with high quality

Product Description

High efficiency and quality tractor Pto Boom Sprayer hot sale 

3W series of sprayer is suitable for spraying the medicament for the planter of bean, corn, cotton, grain. Also for lawn,fruiter,vegetable, road side tree. The capacity could be 200L-1200L, the spraying width could be 6m-12m with 12-120hp tractor.Technical Specification

•This kind of boom sprayer is a tractor mounted sprayer.

•Wide working scope,spraying for bean,cotton,corn etc.

•Wide spraying with to be 12m max.and the working angle of this tractor sprayer could be adjusted.

•The capacity of mounted boom sprayer could be adjusted to meet different need from the user.

Model

Unit

3W-

200

300

400

500

700

900

1000

Working width

m

6

10/12

case volume

L

200

300

400

500

700

900

1000

 

PTO Rotation speed

r/min

540

 

PTO shaft spline

 

6 spline

Total weight

kg

80

90

130

240/270

310/340

350/380

380/400

Matched power

hp

15

20-30

30-45

50-70

60-80

70-90

70-100

Linkage

 

Three-point suspension I(II)type

Products Show

FAQ

Q1: Are you a factory or trading company?

We are a factory with self-supported import and export right. 

 

Q2: How can I trust on your company?

We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc. The good faith, punctual, strict quality control and reasonable price, throughout is the pledge we to each customer.

 

Q3: Where is your factory located? How can I visit there?

Our factory is located in HangZhou City, ZheJiang Province, China.  About 1 hour away from HangZhou Airport. All our clients are warmly welcomed to visit us!

 

Q4: How can I place an order from your website?

It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest. You can also e-mail us directly or join us on live chat for instantaneous answers.

 

Q5: How can I make the payment?

Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Irrevocable L/C at sight could be also accepted.

 

Q6: What's the Payment terms?

FOB, the price of the implement without sea shipment costs.

CIF,  including the unit cost + marine insurance + Shipment charges to your destination port.

CFR, including the unit cost + Shipment charges to your destination port.

 

Q7: At which port do you usually ship the good?

We usually ship goods via HangZhou, ZheJiang , HangZhou, ZheJiang port of China.

 

Q8. How about the Warranty ?
 12 months warranty from the time of the goods arrive at destination.

Our Services

•Professional Sale Team to help you in whole purchase process, help you solve the language communication  problems, help you finish the procedure of booking the ship, delivery, clean the customs.
•Perfect after-sale Constitution to solve each items after sale to meet the need from customers.
•Keep the Good quality and On-time Delivery.
My Contact

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you're unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc's splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc's splines and teeth. This stabilizing element is positioned axially over the disc's width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They're a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Custom Agriculture Implement 3 Point Boom Sprayer Hot Sale     with high qualityChina Custom Agriculture Implement 3 Point Boom Sprayer Hot Sale     with high quality