China supplier 20 Liter 12volt Plastic Agriculture Pesticide Backpack Knapsack Disinfect Electric Battery Pressure Pump Sprayer near me factory

Product Description

       Agriculture garden orchard portable knapsack hand pressure pump chemical sprayer

Application:
1.Suitable for tea trees, roadside hedges, lawns, fruit trees.
2.Application places; Flat, hill
3 .Material:New PP, Stainless steel extension rod
4.The barrel body adopts the new thickened PP material with a thickness of 46.7mm,  more durable and durable.
5.Normal operate Pressure: 0.2-0.3mpa
6.capacity:16L 18L 20L
7.12v 8A No maintenance of aluminum battery, lithium battery

Detail photo:

Technical information:

Model RX-20D-01Z
Capacity 20L
Gross Weight 6.0KGS
Normal Pressure 0.15-0.5MPA
Battery 12V8AH-12V12AH
Packing Quantity 1PC
Packing Dimension 38*22*50CM
20FT QTY/20 700PCS
40HQ QTY/40 1650PCS

Introduction of installation and usage:
1. Parts of sprayer should be installed correctly.Check the connection for air leakage. When using, install water spray test first, and then install the medicine.

2. Prepare pesticide before operation according to operating procedures and strictly follow the use instructions of drugs.Before filling liquid to the liquid barrel, must turn off the switch, in order to avoid liquid leakage, filling liquid to filter with a filter, and the liquid level of liquid cannot exceed the safe water level.

3. Carry the sprayer on the back, hold the pressure bar in the left hand and press it up and down to a certain pressure (about 30 times/min). Open the switch with the handle of the spray bar in the right hand and swing the spray bar.

4. During the initial charging, due to the presence of water in the air chamber and spray rod, the concentration of the spray is relatively low in the first 2-3 minutes of spraying, so attention should be paid to spray, so as not to affect the control effect of diseases and insect pests.

5. When spraying, it is necessary to pay attention, cooperate with your hands and eyes, and apply pesticides in a rhythmic manner. Aim the nozzle at plant parts affected by diseases and insect pests, and apply pesticides in a thoughtful, uniform, correct and safe manner.

6. After the work is finished, the residual liquid in the bucket should be emptied in time and drained with clean water. Meanwhile, check whether there is any water in the air chamber.

7. If the sprayer is not used in the short term, the main parts should be cleaned, dried and installed, and stored in a cool and dry place.If not used for a long time, the metal parts should be coated with butter to prevent rust.
 

  1. Within 48 hours after using the drug, if any pesticide damage is found, the detergent solution of 1%~2% should be sprayed immediately, or the water should be sprayed several times to alleviate the pesticide damage and reduce the loss.

Advantages:
1.Longer Hose;
2.Leak Proof Air Compartment;
3.POM resistant Piston;
4.High Quality Rocker Bar;
5.Finished products 100% detected by our professional QC

 

Types of Ball Bearings

In their most basic form, Ball Bearings have 1 common feature - they are made of steel. The majority of these bearings are made of 52100 steel, which has 1 percent chromium and 1 percent carbon. The steel can be hardened by heat trea
tment. 440C stainless steel is used for rusting problems. A cage around the ball balls is traditionally made from thin steel. However, some bearings use molded plastic cages to save money and friction.
bearing

Single-row designs

Steel linear translation stages often use single-row designs for ball bearings. These types of bearings provide smooth linear travel and can withstand high loads. The material steel has a high modulus of elasticity and a high stiffness, as well as a lower thermal expansion than aluminum. For these reasons, steel is the material of choice for a ball bearing in a typical user environment. Single-row designs for ball bearings are also suitable for applications in humid or corrosive environments.
Single-row designs for ball bearings are available in a variety of sizes and are axially adjustable. They have a high radial capacity, but require relatively little space. Single-row deep groove ball bearings with snap rings are STN 02 4605 or R47, respectively. Bearings with snap rings are identified by a suffix such as NR. They may not have seals or shields installed.
These single-row angular contact ball bearings are capable of supporting axial and radial loads. In a two-raceway arrangement, the radial load on bearing A causes a radial load to act on bearing B. Both axial and radial forces are transmitted between single-row angular contact ball bearings, and the resulting internal force must be taken into account to calculate equivalent dynamic bearing loads P.
Single-row deep groove ball bearings are the most common type of ball bearings. These bearings are designed with only 1 row of rolling elements. The single-row design is simple and durable, which makes it ideal for high-speed applications. Single-row designs for ball bearings are also available in various bore sizes. They can also come in a variety of shapes and are non-separable. If you need a high-speed bearing, you may want to opt for a double-row design.
In addition to single-row designs for ball bearings, you can choose ceramic or steel ball bearings. Ceramic balls are considerably harder than steel balls, but they are not as hard as steel. Hence, ceramic bearings are stiffer than steel ball bearings, resulting in increased stress on the outer race groove and lower load capacity. This is a great benefit for those who need the bearings to be lightweight and strong.
The difference between single-row and double-row designs is in the way that the inner and outer ring are installed. A single-row design places the inner ring in an eccentric position relative to the outer ring. The 2 rings are in contact at 1 point, which causes a large gap in the bearing. The balls are then inserted through the gap. As a result, the balls are evenly distributed throughout the bearing, which forces the inner and outer rings to become concentric.
Deep-groove ball bearings are 1 of the most popular types of ball bearings. They are available in different designs, including snap-ring, seal and shield arrangements. The race diameter of a deep-groove ball bearing is close to the ball's diameter. These types of bearings are suited for heavy loads, and their axial and radial support are excellent. Their main drawback is that the contact angle cannot be adjusted to accommodate a wide range of relative loads.
bearing

Ceramic hybrid ball bearings

Hybrid ball bearings with ceramic balls have numerous advantages. They feature improved kinematic behavior and require less lubrication. Consequently, they can reduce operating costs. Additionally, their low thermal expansion coefficient allows for smaller changes in contact angle and preload variations, and they can retain tolerances. Furthermore, ceramic hybrid ball bearings have significantly increased life spans compared to conventional steel-steel ball bearings, with up to 10 times the lifespan.
Although ceramic bearings can be used in automotive applications, many people believe that they're a poor choice for bicycle hubs. They don't reduce weight and only work well in high-rpm environments. As a result, many cyclists don't even bother with ceramic-based bearings. However, both Paul Lew and Alan are of the opinion that ceramic bearings are best suited for industrial or medical equipment applications. Furthermore, Paul and Alan believe that they are ideal for high-altitude drone motors.
Another advantage of ceramic hybrid ball bearings is that they use less friction than conventional steel-based balls. They are also more durable, requiring less lubrication than steel-based bearings. Furthermore, the lower friction and rolling resistance associated with ceramic-based ball bearings means that they can last 10 times longer than steel-based bearings. A ceramic-based hybrid ball bearing can be used for applications where speed and lubrication are critical.
Ceramic hybrid ball bearings feature both steel and silicon nitride balls. Silicon nitride balls have 50% more modulus of elasticity than steel balls and can improve accuracy and precision. Ceramic balls also have a smoother surface finish than steel balls, which reduces vibration and spindle deflection. These benefits result in increased speed and improved production quality. In addition to this, ceramic balls can also reduce the operating temperature, enhancing the work environment.
Hybrid bearings are a popular alternative to steel bearings. They have some benefits over traditional steel bearings, and are becoming a popular choice for engineered applications. Hybrid bearings are ideal for high speed machines. The material used to manufacture ceramic balls is a high-quality alloy, and is comparatively inexpensive. But you must understand that lubrication is still necessary for hybrid bearings. If you are not careful, you may end up wasting money.
These ball bearings can be used in many industries and applications, and they are widely compatible with most metals. The main advantage of hybrid ball bearings is that they are very durable. While steel balls tend to corrode and wear out, ceramic ball bearings can withstand these conditions while minimizing maintenance and replacement costs. The benefits of hybrid ball bearings are clear. So, consider switching to these newer types of ball bearings.
bearing

Self-aligning ball bearings

Self-aligning ball bearings are a good choice for many applications. They are a great alternative to traditional ball bearings, and they are ideal for rotating applications in which the shaft must move in several directions. They are also ideal for use in rotating parts where a tight tolerance is necessary. You can choose between 2 types: plain and flex shaft. Read on to find out which 1 will suit your needs.
Self-aligning ball bearings are designed with a higher axial load carrying capacity than single-row radial deep groove ball bearings. The amount of axial load carrying capacity is dependent upon the pressure angle. These bearings have a hollow raceway in the outer ring that allows the inner ring to pivot without friction. They are often used for high-speed applications. Because of their design, they are highly accurate.
Self-aligning ball bearings are radial bearings that feature 2 rows of balls in a spherical outer ring. They also feature 2 deep uninterrupted raceway grooves in the inner ring. Their unique features make them an excellent choice for applications where shaft deflection is a significant factor. Despite their small size, they have a high level of precision and can withstand heavy loads.
Self-aligning ball bearings can compensate for misalignment in shaft applications. The inner ring and ball assembly are positioned inside an outer ring containing a curved raceway. This spherical design allows the balls and cage to deflect and re-align around the bearing center. These bearings are also ideal for applications where shaft deflection is significant, such as in simple woodworking machinery.
Another type of self-aligning ball bearing uses a common concave outer race. Both balls and outer races automatically compensate for angular misalignment caused by machining, assembly, and deflections. Compared to spherical rollers, they have lower frictional losses than their spherical counterparts. Self-alignment ball bearings also have lower vibration levels compared to other types of bearings.
Self-aligning ball bearings operate in misaligned applications because their spherical outer raceway can accommodate misalignment. This design allows them to work in applications where shaft deflection or housing deformation is common. They are therefore more suitable for low to medium-sized loads. The only real drawback to self-aligning ball bearings is their price. If you need to purchase a self-aligning ball bearing for your next project, you can expect to pay around $1500.

China supplier 20 Liter 12volt Plastic Agriculture Pesticide Backpack Knapsack Disinfect Electric Battery Pressure Pump Sprayer     near me factory China supplier 20 Liter 12volt Plastic Agriculture Pesticide Backpack Knapsack Disinfect Electric Battery Pressure Pump Sprayer     near me factory